|
|
Build Your Online Product Catalogs?
| Product Name: |
Dornor Conveyors 7400 Series Z-Frame Conveyors
|
| Supply Ability: |
|
| Related proudcts |
conveyors, |
| Specifications |
7400 Series |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
Dornor Conveyors 7400 Series Z-Frame Conveyors
Specifications
Loads up to 20 lbs/square foot of belt (90 kg/m2)
Belt Widths: (152 mm) to 24(610 mm)
Section Lengths: 24 (610 mm) to 20 (6.1 m)
Belt speed: 233 ft/min maximum (71 m/min)
5°, 10°, 15° & 30° Fixed Angle Modules standard
Wear strip material is UHMW
Continuous TIG welded 304 stainless steel frame
#4 Polish on all outside surfaces
Bearing material is 400 stainless steel
Bearing lubricant is H1 type FDA lubricant
FDA approved belting and plastic components
Features & Benefits
Frame is designed with no horizontal surfaces for optimum cleaning. Conveyors over 10 (3,048 mm) long consist of multiple sections which are bolted together.
Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
Solid UHMW wear strips are easily lifted out of the frame without tools to minimize cleaning time.
The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
The return belt supports are segmented plastic slide blocks and are easily removed without tools for effective cleaning.
Drive sprockets are located on a 1.5square stainless steel shaft without fasteners to provide optimum drive strength and cleanability.
Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
Nose bar idler ends (optional) are constructed of a machined UHMW bar to provide a 1.5diameter transfer.
The nose bar drive configuration (optional) allows the use of the nose bar transfer on each end of the conveyor for small product transfers.
Belt lifters (optional) raise the belt from the wear strips by simply pulling an external lever for fast access and effective cleaning.
Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors o |
| Company: |
A&S Conveyor Belts Co. , Ltd.
|
| Contact: |
Ms. Sandra Yan |
| Address: |
No. 469, Xinsheng Road, Gaoxin District, Chengdu, China |
| Postcode: |
610041 |
| Tel: |
+86-28-66960589 |
| Fax: |
+86-28-86129221 |
| E-mail: |
|
|
|
|
Home
